AsbestosCertified.co.uk

Asbestos floor tiles: identifying them and what to do

Square vinyl or thermoplastic floor tiles, often 9 or 12 inches across and laid in older homes, schools and offices, can contain asbestos, as can the black bitumen adhesive beneath them. Intact, they are low risk. The issues start when they are broken up or the adhesive is ground off.

Updated 27 October 2026. Written by the AsbestosCertified editorial team from HSE guidance and the sources linked.

In short

  • Older vinyl and thermoplastic tiles and black bitumen adhesive can contain asbestos; you need a test to know.
  • Leaving tiles in place, or covering them with a new floor, is often the simplest option.
  • Removing intact tiles is usually non-licensed work, but it needs a trained contractor with suitable controls.
  • Never sand, grind or shot-blast the tiles or adhesive.

Spotting tiles that might contain asbestos

Features that should make you suspicious, though they prove nothing on their own:

  • Square tiles, commonly 9 or 12 inches, in a pre-2000 building.
  • A hard, brittle feel, often in muted marbled colours, sometimes laid in chequerboard patterns.
  • Black, tar-like bitumen adhesive underneath.
  • Tiles found under later carpet, laminate or lino when you lift it.

Only a laboratory test confirms whether asbestos is present. A sample test of one tile and the adhesive is inexpensive.

Your options

Leave them. Intact tiles in a room you are not renovating are low risk.

Cover them. Lay new flooring over the top without lifting the tiles. This is often the cheapest and lowest-risk route. Keep a note for future work.

Remove them. If the floor has to come up, for example for underfloor heating or a new subfloor, use a contractor trained in asbestos work. Intact tiles are usually lifted whole with hand tools after wetting, which keeps it non-licensed work. Badly broken tiles, or methods that break them up, may make it notifiable non-licensed work.

What not to do

Do not sand, grind, shot-blast or use a floor scraper on tiles or adhesive that might contain asbestos, and do not let a flooring fitter do so without a test result.

Questions people ask

Can I lay new flooring over asbestos tiles?

Usually yes, if they are firmly stuck and in reasonable condition. Laying a new floor, or a plywood or latex layer, over them avoids disturbing them. Record that they are there.

Is the black glue under carpet asbestos?

Black bitumen adhesive can contain asbestos. Get it tested before scraping or grinding it, and tell your flooring fitter.

What size were asbestos floor tiles?

Many were 9 inches (about 225 mm) or 12 inches (about 300 mm) square, but size alone does not prove anything. Testing is the only way to know.

Get matched with a local asbestos specialist

Tell us what you need and where. We pass your enquiry to one independent asbestos firm that covers your postcode, and they reply with advice and a quote.

  • Free to use, with no obligation to book anything
  • One firm contacts you, not a crowd of callers
  • Email only: we never ask for your phone number
  • Surveys, sample testing, licensed removal and clearance testing
  • Covering Guildford and towns within 15 miles, across Surrey and north-east Hampshire

Before you book, check the firm's credentials yourself. Our checklist explains what to ask for.

Tell us about the property

One independent firm covering your postcode contacts you by email. The service is free and there is no obligation to book.

Get matched with a specialist