In short
- Surveying firm: UKAS accredited to ISO/IEC 17020, which HSE recommends.
- Surveyor: a recognised qualification such as BOHS P402.
- Laboratory: UKAS accredited to ISO/IEC 17025 for asbestos identification.
- Licensed removal: a current HSE licence. Clearance: an independent UKAS-accredited analyst, ideally appointed by you.
Survey firm: UKAS accreditation
HSE recommends using a surveying organisation accredited by UKAS to ISO/IEC 17020. Ask for the accreditation number and check it on the UKAS website.
Surveyor: BOHS P402 or equivalent
The individual surveyor should hold a recognised qualification such as BOHS P402 and be able to show it.
Laboratory: UKAS ISO/IEC 17025
Samples must be analysed by a laboratory accredited by UKAS for asbestos identification. The report should name it.
Removal: HSE licence where needed
Licensable work, such as most asbestos insulating board and pipe lagging, needs an HSE-licensed contractor. Check the licence on HSE's register.
Clearance: an independent analyst
After licensed removal, a UKAS-accredited analyst carries out the four-stage clearance. HSE strongly recommends the client appoints them directly.
Paperwork: waste consignment note
Asbestos is hazardous waste. You should receive a consignment note showing it went to a permitted site.
Surveyors
- Organisation: UKAS accreditation to ISO/IEC 17020 for asbestos surveying. Ask for the accreditation number and look it up on the UKAS website, checking the schedule covers the survey type you need.
- Individual: a recognised qualification such as the BOHS P402 certificate in buildings surveys and bulk sampling for asbestos, plus experience with your type of building.
- Report sample: ask to see an anonymised example report. It should have clear scope, caveats, a register, photos, plans and laboratory certificates.
Laboratories
Sample analysis should be done by a laboratory accredited by UKAS to ISO/IEC 17025 for asbestos identification. The certificate in your report should name the laboratory and its accreditation number.
Removal contractors
- Licensed work: the contractor must hold a current HSE licence. HSE publishes the list of licence holders. Licences can be time-limited or conditional, so check the current status.
- Non-licensed work: there is no licence, so ask for evidence of asbestos training appropriate to the task, the risk assessment and method, and how the waste will be disposed of.
- Trade association: membership of a body such as ARCA (the Asbestos Removal Contractors Association) is a useful extra signal but not a legal requirement.
Clearance analysts
After licensed removal, the four-stage clearance is done by an analyst from a UKAS-accredited organisation. HSE strongly recommends the analyst is appointed by the building owner or client. Relevant individual qualifications include BOHS P403 and P404.
Paperwork to expect
- Survey report or test certificate.
- Quote stating the category of work: licensed, NNLW or non-licensed.
- For licensed work: notification confirmation and plan of work on request.
- Certificate for reoccupation after licensed work.
- Hazardous waste consignment note.
Red flags
Prices far below the published ranges, reluctance to name the laboratory or show accreditation numbers, offers to remove asbestos "off the books" without paperwork, and anyone suggesting you skip the survey before building work.
Questions people ask
Is UKAS accreditation a legal requirement for surveyors?
Not strictly for surveying, but HSE recommends using UKAS-accredited surveying organisations, and HSE says contractors and testing laboratories you use for managing asbestos must be UKAS-accredited for analysis and clearance.
What insurance should an asbestos firm have?
Public liability insurance for all firms, and professional indemnity insurance for surveyors and analysts. Ask for the certificate and check the cover includes asbestos work, as some general policies exclude it.
Should the removal contractor do the survey too?
It can be convenient, but independence matters. Many clients use a separate surveying firm, and HSE strongly recommends the clearance analyst is appointed by the client rather than the removal contractor.