In short
- Required for non-domestic premises and the common parts of residential blocks built before 2000.
- The register says where asbestos is and what condition it is in; the plan says what you will do about it and who is responsible.
- Known materials should be re-inspected regularly, commonly every year, and the register updated.
- The register must be shared with anyone who might work on the fabric.
The register
An asbestos register is the list of asbestos-containing materials in the building, usually taken from a management survey. For each item it records location, product type, extent, condition, asbestos type and the material assessment score, with photographs and plans. Presumed materials belong on it too.
The management plan
The plan turns the register into decisions. HSE's guidance on the duty to manage expects it to cover:
- who is responsible for managing asbestos and how to contact them;
- the register and any priority assessments;
- what will happen to each material: leave and monitor, repair, seal, enclose or remove, and when;
- how often each item will be re-inspected;
- how information is passed to anyone who might disturb the materials;
- the permit-to-work or control procedure before any work on the fabric;
- what to do if asbestos is accidentally damaged.
Re-inspections
Materials that are left in place have to be checked regularly and the results recorded. Annual re-inspection is common; materials in poor condition or busy areas may need checking more often. A re-inspection updates the condition score and the register and flags anything that has changed.
Typical clients around Guildford
Managing agents for purpose-built blocks and converted flats, landlords of shops with flats above, churches and village halls, small schools and nurseries, farm and equestrian buildings, and businesses on older industrial estates. If you have a survey but no plan, or a register that has not been looked at for years, the firm we introduce can bring it up to date.
Questions people ask
What goes in an asbestos management plan?
Who is responsible, the register, the decision for each item (manage, repair, encapsulate or remove), the re-inspection schedule, how information is given to contractors and staff, the procedure for planned work, and what to do in an emergency.
Who can do a re-inspection?
A competent person. Many dutyholders use an accredited surveying firm so that the condition scoring is consistent with the original survey.
Does every contractor need to see the register?
Anyone liable to disturb the fabric does: electricians, plumbers, heating engineers, IT installers, decorators and maintenance staff. Ask them to sign that they have seen the relevant part before work starts.